Home Improvement

How to Keep Your Cleaners Clean

Introduction

To keep a sparkling clean home, you need to put in a lot of effort and time. Most people don’t like to tire themselves out this way. You can do the same by searching for “home cleaning services near me” and hiring professionals for the job. If you do the cleaning by yourself, it’s very important to maintain your cleaning tools and supplies in top condition. Here’s how you can do it. 

The Details

  1. Vacuum Cleaner – To clean a vacuum cleaner, you need some dishwashing liquid, hot water, a pair of scissors, and your favorite essential oil for fragrance. After every time you use the vacuum cleaner, make sure to clean out the reusable cup or dispose of the bag. Every month clean the reusable cup with dishwashing liquid and hot water to remove grease films and hardened dust. 

Unless you have high-end vacuum cleaners that have self-cleaning beater bars, you need to manually remove threads and trapped hair from the beater bar. To do that, you may need the help of a pair of scissors. When the beater bar is kept clean, your vacuum cleaner can turn smoothly and clean effectively. 

You also need to make sure to inspect your vacuum cleaner filters and hoses at least twice or thrice a year. Clean out blockages in the hose and change the disposable filter or wash reusable filters. You can soak the reusable filter in hot water and dishwashing liquid. After that scrub off the dirt layer with a soft and long-bristled brush and rinse it all off under the sink. 

  1. Broom – Irrespective of the material your broom is made from, it needs regular cleaning. To clean your broom, you’ll need a large bucket, hot water, and good old dishwashing liquid. Get your broom outside the house and find a raised edge. It may be on the patio or the raised skirts on the garden walkway. Select a clean edge and run the bristles of the broom across it to get rid of trapped dirt. 

After that, mix dishwashing liquid and hot water inside a large bucket and dip the broom inside it. Snake and spin the broom and make sure the liquid is swished through the bristles. After that, rinse off the broom with cold water and then hang it to dry. Make sure that you don’t hang the broom with the bristles pointing down. Otherwise, the bristles lose their crisp edge, and their shape gets distorted. 

  1. Mop heads – You need chlorine bleach, heavy-duty laundry detergent, hot water, and pine oil cleaner for cleaning mop heads. If you’ve got a removable mop head, simply detach it from the wand and throw it inside the washer with a few towels. Put the washer in a hot water cycle and use heavy-duty detergent to remove trapped dirt, soil, and grease. You can also add chlorine bleach to the towels to disinfect the mop inside the washer. After it’s cleaned, hang it dry.  

On the other hand, if you have a non-removable mop head you need to get a large bucket. Mix a gallon of hot water and a couple of tablespoons of heavy-duty detergent along with pine oil cleaner inside the bucket. Dip the mop head inside the bucket and let it soak in the solution for around half an hour. After that move the head up and down inside the bucket to loosen the soil and dirt. Finally, rinse it thoroughly under hot water and allow it to air dry. 

Your job becomes a lot easier if you have a sponge mop head. Rinse the mop head in hot water and then soak it in a solution of chlorine bleach and hot water. Follow up with a few squeezes and proceed to rinse it well under hot water. After that, squeeze off excess moisture and let it air dry. 

  1. Dusters – No one uses disposable dusters every time they clean. That’s expensive and wasteful. Instead, most people get a good quality duster that gets cleaned and is used for a long time. Start off by taking the duster outside the home and shaking it for a minute or two to get rid of all loose dirt. You can tap the handle against a railing or a raised solid edge of some kind to get rid of the dust. Next, it’s time to remove the embedded dust. 

You know it’s time to get rid of embedded dust when the duster doesn’t pick up as much dust as it used to. Mix a solution of warm water and dishwashing liquid and swish the duster through that mixture for a few minutes. Rinse it thoroughly under clean water until you get rid of all the soapy residue. Follow up with a gentle squeeze and hang it dry. 

  1. Cleaning bucket – As mentioned above, a cleaning bucket is an essential tool both for mopping and cleaning and for cleaning the cleaning tools. That means it’s best to clean and disinfect the bucket as much as you can. After you’re done with a cleaning chore, rinse off the bucket with hot water. This alone does most of the job since the bucket surface doesn’t trap dirt. 

While rinsing with hot water cleans the bucket, it doesn’t kill off the filth. When you use a mop with the bucket, it holds a lot of harmful microbes that can linger on even after rinsing with hot water. To kill them off, you need to fill the bucket with hot water and add pine oil and chlorine bleach. Move around and splash the solution on the internal surface of the bucket and let it rest for a few minutes. After that, get rid of that mixture and rinse the bucket with cold water. 

Conclusion

To keep a clean home, you need to keep your cleaning tools maintained and kept in top condition. All that task consumes a lot of time and energy. Instead, you can search for “home cleaning services near me” and hire professionals to keep your home clean.